ACRYLIC BENCH
- Digital designs for benches available HERE
- Size when assembled 18 x 12 x 7 cm
- For sublimation and HTV/Remove the protective film before printing/
- Recommended settings by the manufacturer 195C for 60 sec.
- Due to its nature the acrylic will soften and bend under heat so it is recommended after printing to flatten under something heavy for 10-20 seconds, then remove the paper and rub with a wet wipe if necessary
- Pressing settings are only a guide and may vary depending on the press, paper and ink used.
- Mini benches available HERE
Every effort is made so that fitment of pieces will hold without additional work, however sometimes due to variations in manufacturing of the materials, and upon being sublimated, you may find fitment to be a little loose or a little tight.
For instances when things become a little loose, you may need a dab of glue to keep them in place, if the blank is intended for assembly and disassembly you can brush the tabs with clear nail varnish and allow to dry to build up the thickness. Clear sticky tape can also be used in the same manner.
For those times when things are a little tight, a medium grade sandpaper, or craft file can quickly remove any unwanted artefacts.